How to Remove a Car’s Cracked or Discolored Plastic and Change the Color Again

You might have noticed a few chipped spots or faded spots on your car’s exterior. No worries! It’s a common occurrence, especially if you own a car that spends a lot of time outside.
If the color of your car’s exterior is fading, it’s probably because the plastic is cracking under the sun’s harsh UV rays. But don’t worry; with a little help from some plastic-removal tricks and some proper care, the color will be restored in no time. Here’s how you can remove a car’s cracked or discolored plastic so you can bring back the color.

Remove the Exterior Plastic Before You Start

Before you start on the process of removing the exterior plastic, make sure you have everything you need. If you don’t, it could be a headache in the making.
You’re going to need some acetone or lacquer thinner, a paint brush or rag, a towel and rags or paper towels, and old clothes that can get stained. Wearing gloves will also prevent any chemicals from spreading onto your skin.
The first step is to remove any remaining plastic from the vehicle. This means using a rag or a paintbrush to remove any residue left on windows, mirrors, trunk lid, bumper cover, etc. Keep in mind that this will only help if there is still any interior plastic left on the car as well. You should then clean the surface with lacquer thinner to remove any last traces of adhesives before proceeding with your project.

Use a Pressure Washer to Remove the Color

One way to remove the color is by using a pressure washer. In general, a pressure washer is used for cleaning and maintaining the exterior of a car. But if you want to use it to remove the color, it’s best to use one that has a nozzle with an extra-long hose. You have to be careful when using a pressure washer without this long-reach feature; if it’s not pointed in the right direction, you might harm your car’s paint.

Wash the Exterior and Change the Color

Wash your car as you normally would to remove dirt, dust, and other particles from the exterior.
If your car is faded or discolored, washing it will help restore some of the color. Rinse the exterior with a hose or a bucket and then dry it off with a clean rag or towel.

Spray Polish to Create a New Finish

If the color of your car’s exterior is fading, it’s probably because the plastic is cracking under the sun’s harsh UV rays. But don’t worry; with a little help from some plastic-removal tricks and some proper care, the color will be restored in no time. Here’s how you can remove a car’s cracked or discolored plastic so you can bring back the color. Spray polish is a quick and easy solution to this problem that saves you both time and money! You just need to find a spray paint that matches your car’s original exterior color and then follow the directions on the back of the bottle to create that new finish.
Another option for restoring faded paint is to use waxes as well as sealants. Many products are available for this purpose, so you can find one depending on which type of finish you want to apply to your car. These products typically come in spray cans, which makes them super convenient and easy-to-use. They also provide durability against sun damage and stains, so they’ll last much longer than other types of treatments like clay bar treatment or paint protection film application.

Protect the Exterior Aftercare to Maintain Color

Before you begin any project, like removing a car’s cracked or discolored plastic, it’s important to protect the exterior. If you don’t protect the surface by waxing your car regularly and buffing out any scratches or dents, the color will fade faster. Keep in mind that these steps will help preserve the paint job for years to come.
Another thing to keep in mind is that underneath the paint, there is a layer of plastic and rubber. This layer is what gives your car its shine, but when it becomes worn out and cracked, it looks bad. To avoid this from happening, use wax on a regular basis to maintain a clean finish so you can keep up with waxing those cracks and blemishes before they become noticeable.

Remove Discolored Plastic

First, you have to start by removing the discolored plastic. You can do this by getting a putty knife and scraping the coloured plastic off. Be careful not to scratch the original paint or damage any fine details. Be sure to use gloves when doing so because the chemicals in your hands will leave stains on the surface. After you’ve removed the discolored plastic, clean up all of the dust with a dry cloth.

Conclusion

Car owners who have cracked or discolored exterior plastic should consider using a pressure washer to remove the color. The exterior plastic should be washed and changed to a new color. After that, they should spray polish the exterior to create a new finish. These steps will maintain the color that has been changed and prevent the cracked or discolored plastic from reappearing over time.

Leave a Comment